Grain Store Boarding Guide

About our Grain Store Boarding 

We buy old barns that we carefully strip by hand in order to salvage as much timber as we can. Our first batch of boards were from an old grain store so the name was born - grain store boarding. We plain the bottom surface and brush the top side by hand so ensure that our grain store boarding retains all the character - old markings, nail holes, paint marks and splits - that make it so appealing.

How to fit

We recommend prepping the wall by painting it black or use black Tyvek before fixing the cladding. This will help if there are any gaps between the boards, as you will only see a black shadow gap. As long as the wall is flat, in good condition and not damp, you can fix the boarding directly to the wall. If the wall isn’t stable and requires battening, you can run horizontal or vertical battens, depending on the direction of your cladding. You can then nail, screw or glue the boarding to this.

What to Expect on Arrival

When your grain store boarding arrives, it may look quite different from how it will appear once installed. Don’t be alarmed! At first glance, the boards might seem rough or inconsistent—but that’s part of their charm. This is very old, character-rich wood. Once installed on a prepared wall or ceiling, the transformation is remarkable.

Please be aware above is advisory and if you’re unsure, seek professional advice. This cladding is a natural reclaimed material so please be aware there will be discrepancies in thickness, width and colour in the cladding.